Below is a complete, step-by-step guide for installing the Meshtastic daemon/server. In the terminal window, we need to execute the following commands in sequence
- system update: 
       system update
       sudo apt upgrade -y
- Docker Installation:
       curl -sSL [https://get.docker.com](https://get.docker.com) | sh
       sudo usermod -aG docker $USER
- Creating the configuration file for MeshStick:
       sudo nano /etc/meshtasticd/config.yaml
     Now, the following is entered into the editor:
        Lora:
  Module: sx1262
  spidev: ch341
  CS: 0
  IRQ: 6
  Busy: 4
  Reset: 5
  DIO2_AS_RF_SWITCH: true
  DIO3_TCXO_VOLTAGE: true
Webserver:
  Port: 9443
  RootPath: /usr/share/meshtasticd/web
General:
  MaxNodes: 200
  MACAddress: AA:BB:CC:DD:EE:01
      to save this: CTRL+O , then CTRL+X
- Release of USB-SPI resource:
       sudo modprobe -r ch341 i2c_ch341 spi_ch341 2>/dev/null
- Starting the Meshtastic server:
       docker run -d \
  --name meshtasticd \
  --restart unless-stopped \
  --privileged \
  -v /dev/bus/usb:/dev/bus/usb \
  -v /var/lib/meshtasticd:/var/lib/meshtasticd \
  -v /etc/meshtasticd/config.yaml:/etc/meshtasticd/config.yaml:ro \
  -p 9443:9443 \
  -p 4403:4403 \
  meshtastic/meshtasticd \
  meshtasticd --fsdir=/var/lib/meshtasticd -c /etc/meshtasticd/config.yaml
- Checking if everything is Ok:
       docker logs --tail 30 meshtasticd
